background image

7-2

7-2

7-2

7-2

7-2

DNA Engine & DNA Engine Tetrad Operations Manual

Editing a Stored Program

The DNA Engine’s editing tools, available through 

Edit

 on the Main Menu,

make it easy to extensively edit stored programs by

Changing individual values in program steps,

Adding new steps,

Deleting steps, and

Adding options to temperature and ramp steps.

Note:

Note:

Note:

Note:

Note:

The editing tools do not include a renaming function. To re-

name a program, see “Renaming a Program,” chapter 8.

Initiating Editing

To initiate editing, select 

Edit

 from the Main Menu, then press «

Pro-

ceed

». One of two types of screen will be displayed, depending on

whether your programs have been stored in the <MAIN> folder or in
custom folders.

If all programs have been stored in <MAIN>:

The screen will list the contents of <MAIN>:

Select the program to be edited, then press «

Proceed

».

If programs have been stored in custom folders:

The screen will list all the folders residing in the machine:

Select the folder containing the program, then press «

Proceed

». A list

of all programs in the folder will be displayed. Select the program to
be edited (CUSTOM1 is used in the following and all succeeding ex-
amples in this chapter), then press «

Proceed

».

In either instance, after you press «

Proceed

», the first editing screen will

be displayed (see next section).

Edit:
_<MAIN>  <FOLDER1>
 <FOLDER2>

Edit:      <MAIN>
_CUSTOM1   CUSTOM2
 CUSTOM3   QUIKSTEP
 2-STEP    3-STEP

Summary of Contents for PTC-0200
















































































































































Reviews: