MJ Research PTC-0200, Operation Manual

Page: 63 / 143

6-13 6-13 6-13 6-13 6-13
Creating Programs
Select one of the displayed choices, then press « Proceed »:
• Yes accepts the step and displays the Enter Menu again. Use the En-
ter Menu to enter the next step in the program.
• No allows reentry of the ramp rate and finish temperature.
• Option displays the Options Menu (see “Modifying a Program Step
with the Options,” p. 6-11).
Tip: Tip:
Tip: Tip:
Tip: A ramp step will not hold the block at its finish tempera-
ture. Instead, as soon as finish temperature is reached, the
next step of the program will immediately be executed. To
hold the block for some period of time at a ramp step’s fin-
ish temperature, make sure a temperature step immediately
follows the ramp step, and program the hold at the finish
temperature into this step.
Entering a GoTo Step
To enter a GoTo step, select GoTo from the Enter Menu. The first GoTo
screen will be displayed:
The second line of this screen shows the number of the step being pro-
grammed (5 is used in the example above). The last line of the screen
allows entry of the number of the step the program should cycle back to.
Enter the number of the step the program should cycle back to (1 is used
in the example below):
Enter: CUSTOM1
3= 2.0˚/s to 69.0˚
OK? _YES No Option
Enter: CUSTOM1
5=GoTo
GoTo step: _
✔
Enter: CUSTOM1
5=GoTo
GoTo step: 1