MJ Research PTC-0200, Operation Manual

Page: 68 / 143

6-18 6-18 6-18 6-18 6-18
DNA Engine & DNA Engine Tetrad Operations Manual
the Enter Menu to enter the next step in the program.
• No cancels the Beep option.
• Option displays the Options Menu again, if a temperature step is
being modified. Use the Options Menu to enter another option for
the step. (
Option will not be displayed if a ramp step is being modi-
fied, since Beep is the only option available for ramp steps.)
Revising During Programming
To change values in a program you are entering, follow the procedures
described below. This editing method should be used to change just a
few values at a time. To make many changes, or to delete or add entire
steps, use Edit mode (see chapter 7).
To Change the Last Value Entered or Menu Option
Chosen
Press « Cancel ». The choice just made will be cancelled, so that another
value may be entered or another menu option chosen. Press « Proceed »
after changing a value, so that the program will accept it.
To Change All the Values in the Step Being Entered
Repeatedly press « Cancel ». Each time you press the key, the cursor will
move backward through the values for the step, deleting the values as it
moves. When all values for the step have been deleted, enter new val-
ues, or press «
Cancel » one more time to display the Enter Menu for the
step. At this point you can change the step to a different type.
To Change Values for Earlier Steps in the Program
Repeatedly press « Cancel » until the Enter Menu for the step you are
working on is displayed. Press « Cancel » one more time to display a list
of all steps entered so far. The list will show the step number and the
values for each step, including any options chosen. The last-entered steps
will be displayed first:
Enter: CUSTOM1
3= 55.0˚ for 0:30
4= 72.0˚ for 1:00
5=