Mizuho MOS-1302B Operator'S Manual Download Page 61

Page: 61 / 86

Using the

leg traction

device

Press

and

simultaneously and make sure that the table top is level.

Press

and

simultaneously to flex the seat plate downward until it

clicks ( , 50° or more), and press

and

simultaneously to lower the

tabletop until it stops ( ).

Insert the inserting shaft of the extension arm right/left into the insertion hole of

the table and tighten the arm fixing handle.

Insertion hole

Inserting shaft

Arm fixing handle

Tighten

Arm fixing handle

WARNING

Make sure to tighten Traction Device Arm fixing handle

securely. If they are not tightened securely, the extension arm

right/left will fall off.

Loosen the handle of the the cart for traction arm and press

and

simultaneously to raise the table.

Loosen

Move away the the cart for traction arm

when the extension arm right/left is

detached from the the cart for traction arm.

Summary of Contents for MOS-1302B























































































Search results

Summary of Contents for MOS-1302B

Reviews:

Related manuals for MOS-1302B

Brands by name

Popular brands

Mizuho MOS-1302B, Operator'S Manual

Search results

Summary of Contents for MOS-1302B

Reviews:

Related manuals for MOS-1302B

Brands by name

Popular brands