Mizuho MOS-1302B Operator'S Manual Download Page 7 | Manualshive

Page: 7 / 86

background image

3

1

Introduction

This Manual is intended to support the safe and effective operation of the operating table.
Read this Manual carefully and familiarize yourself thoroughly with its contents (operation,
inspection, adjustment, servicing) before operating the table.
Using the table without following the instructions contained in this Manual may cause a serious
accident.

Safety information in this Manual and on the labels attached to the table is given in the following
three forms for easy and full understanding:

Introduction

WARNING

CAUTION

NOTE

A WARNING notice indicates a situation which can result

in death or serious injury to a person if the notice is

ignored and the table is handled improperly.

A CAUTION notice indicates a situation which can result

in injury to a person and/or damage to property if the

notice is ignored and the table is handled improperly.

Description under this heading gives supplementary

explanation of the functions of the table.

The WARNING and CAUTION notices in this Manual relating to the operation, inspection,
adjustment, or servicing of the table apply in using the table for surgical operations.

The user is solely responsible for safety if the table is operated, inspected, adjusted, or serviced in

a way not specified in this Manual.

This product is designed to support patients during surgical procedures.
This product has a functions to adjust the height of the tabletop and to position a patient's body.
Both a medical grade AC power and a battery are available as a power source.
This product is to be used by health care professionals, including but not limited to surgeons,
nurses and biomedical technicians.

n

About this product

«
...
5
6
7
8
9
...
»

Summary of Contents for MOS-1302B























































































Reviews:

No comments

Related manuals for MOS-1302B

Brand: Rangevision Pages: 31

Brand: DARKSTAR TECHNOLOGIES Pages: 4

Brand: TDW Pages: 2

Brand: Taurus Pages: 25

Brand: Vancare Pages: 3

Brand: Paitec Pages: 14

Brand: GE Pages: 2

Druck DPI 620 Genii

Brand: GE Pages: 154

Arize Element Top Light

Brand: GE Pages: 2

Brand: Datex-Ohmeda Pages: 104

Druck DPI 620 Genii

Brand: Baker Hughes Pages: 166

Druck DPI 620 Genii

Brand: Baker Hughes Pages: 340

Brand: Danfoss Pages: 106

Brand: Federal Signal Corporation Pages: 12

Brand: Jacobsen Pages: 20

Brand: Quivogne Pages: 13

Brand: Kärcher Pages: 88

Brand: Landoll Pages: 70

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands