Mizuho MOS-1302B Operator'S Manual Download Page 51

Page: 51 / 86

Using the

leg traction

device

Examples of combination of various leg traction

device components

Femoral neck fracture procedure position

Traction device,

traction shoe, right/left

Inner thigh column (large), Pad (large)

Wide pelvis support,

Pad (for wide pelvis

support)

Extension arm,

right/left

Apparatus used for this position

- Extension arm, right/left

- Inner thigh column (large)

- Pad (large)

- Wide pelvis support

- Pad (for wide pelvis support)

- Traction device, traction shoe, right/left

Attach the extension arm right/left to the cart for traction arm.

Turn the device upside down and loosen

the handles to extend it.

Turn fully extended device right side up

and place it on the cart.

Fix the extension arm right/left by tighten

the handle of the the cart for traction arm.

Cart for traction arm

Loosen

Tighten

Summary of Contents for MOS-1302B























































































Search results

Summary of Contents for MOS-1302B

Reviews:

Related manuals for MOS-1302B

Brands by name

Popular brands

Mizuho MOS-1302B, Operator'S Manual

Search results

Summary of Contents for MOS-1302B

Reviews:

Related manuals for MOS-1302B

Brands by name

Popular brands