Chapter 1
15
About this document
The following shows the relevant manuals.
Title
Number
Safety Controller User’s Manual
WS-CPU-U-E
(13JZ32)
Safety Controller Ethernet Interface Module User’s Manual
WS-ET-U-E
(13JZ33)
Safety Controller CC-Link Interface Module User’s Manual
WS-CC-U-E
(13JZ45)
Safety Controller Setting and Monitoring Tool Operating
Manual
SW1DNN-WS0ADR-B-O-E
(13JU67)
Safety Controller CPU Module User's Manual (Hardware)
WS-CPU-U-HW-E
(13JZ91)
Safety Controller Safety I/O Module User's Manual
(Hardware)
WS-IO-U-HW-E
(13JZ92)
Safety Controller Safety Relay Output Module User's Manual
(Hardware)
WS-SR-U-HW-E
(13JZ93)
Safety Controller Ethernet Interface Module User's Manual
(Hardware)
WS-ET-U-HW-E
(13JZ95)
Safety Controller CC-Link Interface Module User's Manual
(Hardware)
WS-CC-U-HW
(13J209)
1.2 Target
group
This manual is addressed to the planning engineers, designers and operators of
systems which are to be protected by a MELSEC-WS safety controller. It also
addresses people who integrate the MELSEC-WS safety controller into a machine,
commission it initially or who are in charge of servicing and maintaining the unit.
1.3
Depth of information
This manual contains information on the MELSEC-WS safety controller in the
following subjects:
mounting
electrical installation
hardware commissioning
error diagnostics and remedying
part numbers
conformity and approval
Planning and using other company's protective devices also require specific technical
skills which are not detailed in this documentation.
When operating the MELSEC-WS safety controller, the national, local and statutory
rules and regulations must be observed.
For the acquisition of Setting and Monitoring Tool, please contact your local Mitsubishi
representative.
The SICK EFI-compatible devices and SICK configuration and diagnostics software
CDS are the products of SICK.
For details of the SICK products, please contact your local SICK representative (see
Section 14.6).
www.sens-control.com
Table 1:
Overview of the MELSEC-
WS manuals
Note
Summary of Contents for MELSEC-WS series
