Mitsubishi Gpredict 1.2 User Manual Download Page 8

Page: 8 / 64

Introduction

users to customise the overall behaviour of gpredict.

●

Chapter 4

gives a more in-depth description of the modules and the

views. It also describes how to customise each individual module.

●

Chapter 5

describes the pass prediction functions in gpredict

including the pass condition parameters used by the prediction
engine.

●

Chapter 6

describes how you can update the Keplerian elements for

the satellites in the gpredict database.

●

Chapter 7

describes how to setup and operate gpredict with your

radios and antenna rotators.

1.4 Your Feedback is Appreciated

Both gpredict and this user manual is work in progress. Your comments,
questions and bug reports are highly appreciated. There is a web forum at

http://forum.oz9aec.net/

where you can discuss everything related to

gpredict and ask the community for help.
The gpredict website accessible at

http://gpredict.oz9aec.net/

has more

information about other ways you can get support with your problems, or
how you can get in touch with the developers (see under User Support).

Summary of Contents for Gpredict 1.2

































































Search results

Summary of Contents for Gpredict 1.2

Reviews:

Related manuals for Gpredict 1.2

Brands by name

Popular brands

Mitsubishi Gpredict 1.2, User Manual

Search results

Summary of Contents for Gpredict 1.2

Reviews:

Related manuals for Gpredict 1.2

Brands by name

Popular brands