Mitsubishi F940GOT-LWD-E, Operation Manual

Page: 24 / 300

Graphic Operation Terminal F940GOT Introduction 1
1-10
1.5.2 Connection of peripheral units of GOT
The figure below shows the system configuration required to use the GOT with peripheral
devices.
Graphic operation terminal
F940GOT-SWD/LWD-E
Data transfer cable FX-232CAB-1
(when the RS-232C connector in the PC is 9-pin type),
Data transfer cable FX-232CAB-2
(when the RS-232C connector in the PC is half-pitch, 14-pin type) or
Data transfer cable F2-232CAB-1
(when the RS-232C connector in the PC is 25-pin type)
Attach a ROM to the
F9GT-40UMB, then
connect it to a connector
provided on the rear face
of the GOT.
Computer link
(disabled during
RS-232C communication)
Data transfer
cable
FX-232CAB-1
General-purpose personal computer
(screen creation software)
FX-PCS-DU/WIN-E (V2.00) or
SW
¨
D5C-GOTRE-PACK ("
¨
" is a
numeric not less than 1.)
Peripheral units of GOT
ROM writer
General-purpose ROM writer
Printer
< Dedicated printers >
GT-10A
K6PR(-K), A7(N)PR
< General-purpose printers >
ESC/P
Printer equipped with
RS-232C interface
(Prints out sampling data,
alarm history and alarm
messages.)
EPROM memory
FX-EPROM-4M
(User screens can
be stored using a
general-purpose
ROM writer.)
Printer
PC-PR201H or its equivalent
ESC/P
* A7(N)PR is available
for the A7PHP/HPG.
(Prints out screen data,
sampling data, etc.)