BIOS Utility
4-7
Selecting the “User” Option
There are cases when you cannot use the option
Auto
, instead you
have to select
User
. Choose the
User
option when you have installed
an hard disk that was previously formatted but does not use the disk
native parameters or structure, that is, the disk type may be in the
hard disk types list but the number of cylinders, heads, and sectors
differ.
Follow these steps to configure a hard disk with the
User
option:
1.
Highlight an hard disk parameter.
2.
Select the option
User
and press
.
3.
Type in the number of cylinders, heads, and sectors of the drive
under the appropriate columns.
Be sure to have the correct hard disk
information beforehand.
4.
Choose
YES
when asked if you want to save CMOS data.
4.2.4
System Memory
The system automatically detects the total amount of onboard memory
during the POST and sets the memory parameters accordingly. If you
install additional memory, the system automatically adjusts the Total
Memory parameter to display the new memory size.
4.2.5
Math Coprocessor
The CPU includes a math coprocessor so this parameter shows
Installed
by default.
Summary of Contents for Apricot FT2200
