5-10
System Guide
5.1.6
Adding or Removing Boards
Each time you add or remove a board, you must reconfigure the
computer using the EISA Configuration Utility program.
Adding Boards
If you are adding a PCI device or a plug-and-
play ISA board, proceed to step 5.
PCI devices and plug-and-play (PnP) ISA
boards do not require a corresponding CFG
file. The configuration information is already
stored on the board.
Follow these steps when adding a board:
1.
Select
Maintain system configuration diskette
from the
main menu then press
.
2.
From the screen that appears, select
Copy/update CFG files
the press
. A list of CFG files from your system
configuration diskette appears.
The EISA Configuration Utility uses the CFG
file to configure the board into the system
without creating conflict with other boards or
devices.
3.
Select the appropriate CFG files then press
to return to
Maintain system configuration diskette
screen.
4.
Select the option
Return to the main menu
then press
.
5.
From the main menu, select the option
Configure computer
then press
. The screen
Steps in configuring your
computer
appears.
Summary of Contents for Apricot FT2200
