System Configuration
3-8
3.
Remove the screw attaching the 3.5-inch drive frame to the
housing.
If you are replacing a previously installed drive, remove the old
drive from the frame.
4.
Secure a 3.5-inch drive on the frame with four screws.
Figure 3-7
Attaching a 3.5-inch Diskette Drive on the Frame
5.
Insert the drive into the drive bay and secure it with a screw.
Figure 3-8
Installing a 3.5-inch Diskette Drive
6.
Connect the drive power and signal cables.
Summary of Contents for Apricot FT2200
