BIOS Utility
4-23
PCI Slots
These parameters allow you to specify the appropriate interrupt for
each of the PCI devices. You can assign IRQ3, IRQ4, IRQ5, IRQ7,
IRQ9, IRQ10, IRQ11, IRQ12, IRQ14, or IRQ15 to the slots.
Make sure that the interrupt you assign in
any of the PCI slots are not used by other
devices to avoid conflicts.
Press
or
to move between fields. Press
or
to select
options.
4.5.2
VGA Palette Snoop
PCI devices support the palette snooping technique that enables the
device to control access to their palette registers. Set this parameter
to
Enabled
if you installed a video card in the ISA bus slot. Set this
parameter to
Disabled
if you don’t have a video card installed.
4.5.3
Onboard SCSI
This parameter allows you to enable or disable the SCSI feature.
Boot Device
This parameter allows you to enable or disable the onboard SCSI boot
priority. Setting this item to
Enabled
allows the onboard SCSI device
to be the first priority boot device.
Summary of Contents for Apricot FT2200
