Mitsubishi Apricot FT2200, System Manual

Page: 49 / 125

System Configuration 3-9
5.25-inch External Device
Follow these steps to install a 5.25-inch external device:
1. Open the lower front panel. Unlock the left panel security if it is
locked.
2. Remove the upper front panel including its frame by pressing the
latch underside and pulling the panel and frame out. See Figure
3-6.
3. Attach the metal guides on the sides of the external device, such
as a CD-ROM drive, that you wish to install.
Figure 3-9 Attaching the Metal Guides to a CD-ROM Drive
If you are installing a wide SCSI device, set
its ID and terminators before installing it into
the drive bay.
See section 3.4 for information on setting the
drive ID and terminators.