Mitsubishi MOTORS LANCER EVOLUTION 2014, Manual

Page: 31 / 338

Head restraints
4-6 Seat and restraint systems
4
To reduce the risk of injury in an accident,
adjust the head restraint height so that the
center of the restraint is at your eye level
when seated. Any person too tall for the
restraint to reach their eye level when seated
should raise the restraint to the highest locked
position.
 To raise the restraint, pull it straight up.
 To lower the restraint, push down on it
while pressing the lock knob (A) in the
direction shown by the arrow.
 After adjusting the height, push down on
the restraint to make sure it is locked in
position.
Press the lock knob (A) in the direction
shown by the arrows. Then pull the head
restraint up and out of the seatback.
First check that the head restraint is facing in
the right direction as shown in the previous
illustration, and then insert it into the seat-
back. Push the head restraint down while
WARNING
 In order to minimize the risk of a neck
injury due to a rear impact, the head
restraint must be adjusted to the proper
position before vehicle operation.
 Driving without the head restraints in
place can cause your passengers serious
injury or death in an accident. To reduce
the risk of injury in an accident, always
make sure the head restraints are installed
and properly positioned when the seat is
occupied.
 Never place a cushion or similar device on
the seatback. This can adversely affect
head restraint performance by increasing
the distance between your passenger’s
head and the restraint.
Adjustment of the head restraint
height To remove
WARNING
 To help minimize the risk of neck injury in
the event of an accident, the head
restraints must be properly installed and
positioned to proper height before vehicle
operation.
To install
BK0200800US.book 6 ページ ２０１３年２月１４日 木曜日 午後２時２８分