manualshive.com logo in svg

Mitsubishi MOTORS LANCER EVOLUTION 2014, Manual

The Mitsubishi Motors Lancer Evolution 2014 is an exceptional sports sedan that combines precision performance with cutting-edge technology. Enhance your driving experience by accessing the free downloadable user manual from manualshive.com, offering step-by-step instructions and valuable insights. Maximize your enjoyment of this iconic vehicle with the comprehensive manual at your fingertips.

Share
Download
background image

Twin Clutch SST (Sportronic Shift Transmission) (if so equipped)

Features and controls

5-65

5

Shifting can be performed even while the
accelerator pedal is depressed.
This allows the driver to enjoy sporty driving,
such as quick cornering, by nimbly down-
shifting to reduce vehicle speed just before
entering a curve.

N00540600016

While the vehicle is stopped or being driven,
move the gearshift lever from the “D”
(DRIVE) position in the main shift gate
toward the driver’s seat to select manual
shifting.

Each time the gearshift lever is pulled rear-
ward, the transmission shifts up 1 gear.
In addition, each time the gearshift lever is
pushed forward, the transmission shifts down
1 gear.

CAUTION

When manually shifting while the vehicle is
being driven, select the correct shift position
to control the engine speed so that the
tachometer indicator does not enter the red
zone.

Sudden engine braking and rapid accelera-
tion can cause the vehicle to skid. Shift down
according to road conditions and vehicle
speed.

If both the left and right sportronic steering
wheel shifters are operated at the same time,
the transmission may not change gears.

NOTE

Only the forward gears 1 to 6 can be
selected.
To reverse or park, place the gearshift lever
in the “R” (REVERSE) or “P” (PARK) posi-
tion. 

During manual shifting, downshifting will be
performed automatically when the vehicle
slows down and the transmission will down-
shift to 1st gear before the vehicle stops.

If the gearshift lever or sportronic steering
wheel shifters are operated repeatedly, the
transmission will also shift repeatedly.

In order to ensure driving performance,
upshifting may not occur depending on the
vehicle speed even if the gearshift lever or
sportronic steering wheel shifters are oper-
ated. In addition, in order to prevent exces-
sive engine speed, the buzzer sounds and
downshifting may not occur depending on
the vehicle speed even if the gearshift lever
or sportronic steering wheel shifters are
operated.

When driving in an aggressive manner
involving high engine rpm, sudden accelera-
tion and/or deceleration, the Twin Clutch
SST could take longer to shift due to higher
fluid temperatures.

CAUTION

Shifting using the gearshift lever

 

Selecting manual shifting

Shifting up and shifting down

 

BK0200800US.book  65 ページ  ２０１３年２月１４日　木曜日　午後２時２８分

Summary of Contents for LANCER EVOLUTION 2014



















































































































































































































































































































































Reviews:

No comments

Related manuals for LANCER EVOLUTION 2014

DEFA 412737 Fitting Instructions Manual preview
412737
Brand: DEFA Pages: 7
Prorack K869 Fitting Instructions Manual preview
K869
Brand: Prorack Pages: 15
Hama 00201510 Operating Instructions Manual preview
00201510
Brand: Hama Pages: 40
Dodge 8W-30 Wiring Diagram preview
8W-30
Brand: Dodge Pages: 24
Würth 071554055 User Instructions preview
071554055
Brand: Würth Pages: 36
Dodge Dodge Challenger SRT8®Challenger SRT8 392 2012 Specifications preview
Dodge Challenger SRT8®Challenger SRT8 392 2012
Brand: Dodge Pages: 5
Edelbrock 65932 Installation Instructions preview
65932
Brand: Edelbrock Pages: 2
Chevrolet Impala Limited 2014 Owner'S Manual preview
Impala Limited 2014
Brand: Chevrolet Pages: 356
Vauxhall Meriva 2014 Infotainment Manual preview
Meriva 2014
Brand: Vauxhall Pages: 131
Yakima K1249 Instructions Manual preview
K1249
Brand: Yakima Pages: 9
Cadillac XT4 2022 Convenience/Personalization Manual preview
XT4 2022
Brand: Cadillac Pages: 20
Oldsmobile 2003 Silhouette Owner'S Manual preview
2003 Silhouette
Brand: Oldsmobile Pages: 466
Curtis 1POLXP1000RP Installation & Owner'S Manual preview
1POLXP1000RP
Brand: Curtis Pages: 6
WATT CARWATT CV12-220C150 User Manual preview
CARWATT CV12-220C150
Brand: WATT Pages: 26
Gigaware Gigaware 12-493 User Manual preview
Gigaware 12-493
Brand: Gigaware Pages: 8
Fab Fours H3250 Installation Instructions Manual preview
H3250
Brand: Fab Fours Pages: 13
Prorack T84HALF Instruction Manual preview
T84HALF
Brand: Prorack Pages: 7
PNI Escort P05 A User Manual preview
Escort P05 A
Brand: PNI Pages: 12

Brands by name

Popular brands

Load more brands