Mitsubishi MOTORS LANCER EVOLUTION 2014, Manual

Page: 194 / 338

Wiper and washer switch
Features and controls 5-133
5
The misting function can be used when the
ignition switch is in the “ON” or “ACC”
position.
The wipers will operate once if the wiper
lever is raised to the “MIST” position and
released. This operation is useful when it is
drizzling, etc. The wipers will continue to
operate while the lever is held in the “MIST”
position.
The windshield wipers can be operated with
the ignition switch in the “ON” or “ACC”
position.
If the blades are frozen to the windshield or
rear window, do not operate the wipers until
the ice has melted and the blades are freed,
otherwise the wiper motor may be damaged.
Can only be used when the ignition switch is
“ON” position.
If the lever is put in the “AUTO” position, the
rain sensor (B) will detect the extent of rain
(or snow, other moisture, dust, etc.) and the
wipers will operate automatically.
Keep the lever in the “OFF” position if the
windshield is dirty and the weather is dry.
1- Fast
2- Slow
NOTE
 The speed-sensitive-operation function of
the windshield wipers can be deactivated.
For further information, please contact your
authorized Mitsubishi Motors dealer or a
repair facility of your choice.
Misting function
A
Vehicles equipped with rain sensor
MIST- Misting function
The wipers will operate once.
OFF- Off
AUTO- Auto-wiper control
Rain sensor
The wipers will automatically
operate depending on the amount
of moisture on the windshield.
LO- Slow
HI- Fast
Rain sensor (if so equipped)
BK0200800US.book 133 ページ ２０１３年２月１４日 木曜日 午後２時２８分