manualshive.com logo in svg

Mitsubishi MOTORS LANCER EVOLUTION 2014, Manual

The Mitsubishi Motors Lancer Evolution 2014 is an exceptional sports sedan that combines precision performance with cutting-edge technology. Enhance your driving experience by accessing the free downloadable user manual from manualshive.com, offering step-by-step instructions and valuable insights. Maximize your enjoyment of this iconic vehicle with the comprehensive manual at your fingertips.

Share
Download
background image

Service precautions

9-2

Vehicle care and maintenance

9

N00937301397

Taking regular care of your vehicle will pre-
serve its value and appearance as long as pos-
sible.

You can do some of the maintenance work
yourself, and the rest should only be per-
formed by an authorized Mitsubishi Motors
dealer or a repair facility of your choice.
If you discover a malfunction or other prob-
lem, have it corrected by an authorized Mit-
subishi Motors dealer or a repair facility of
your choice.
This section describes the maintenance
inspections that you can do yourself, if you so
desire. Follow the instructions and precau-
tions for each procedure.

Have you purchased the Mitsubishi Motors
Diamond Care Protection Plan? The Plan
supplements your new vehicle warranties.
See your authorized Mitsubishi Motors dealer
for details.

N00937400418

The catalytic converter requires you to use
unleaded fuel only. Leaded gasoline will
destroy the emission-control effectiveness of
the converter.

Normally, the catalytic converter does not
require maintenance. However, it is important
to keep the engine properly tuned for the con-
verter to continue to work properly. 

Service precautions 

WARNING

When checking or servicing the inside of
the engine compartment, be sure the
engine is stopped and has had a chance to
cool down. 

If you need to work in the engine compart-
ment with the engine running, be espe-
cially careful that your clothing, hair, etc.
does not get caught in the fan, drive belts,
or other moving parts.

The fan can turn on automatically even if
the engine is not running. Turn the igni-
tion switch to the “LOCK” position to be
safe while you work in the engine com-
partment.

Do not smoke or allow open flames around
fuel or the battery. The fumes are flamma-
ble. 

Be extremely careful when working
around the battery. It contains poisonous
and corrosive sulfuric acid. 

Do not get under your vehicle while it is on
a jack.
Always use properly rated automotive
jack stands. 

Handling your vehicle’s parts and materi-
als in the wrong way can injure you. Ask
an authorized Mitsubishi Motors dealer
or a repair facility of your choice if you
have questions. 

WARNING

Catalytic converter 

BK0200800US.book  2 ページ  ２０１３年２月１４日　木曜日　午後２時２８分

Summary of Contents for LANCER EVOLUTION 2014



















































































































































































































































































































































Reviews:

No comments

Related manuals for LANCER EVOLUTION 2014

EAL Formula 523585 Assembly Instructions preview
Formula 523585
Brand: EAL Pages: 4
Vauxhall Cascada Quick Reference Manual preview
Cascada
Brand: Vauxhall Pages: 2
Warrior Winches C10000NH Assembly & Operating Instructions preview
C10000NH
Brand: Warrior Winches Pages: 17
NavLinkz CAM-N-CV133-V Manual preview
CAM-N-CV133-V
Brand: NavLinkz Pages: 4
DEFA WarmUp 411702 Fitting Instructions Manual preview
WarmUp 411702
Brand: DEFA Pages: 9
rough country Slim Line LED Light Grille Kit Manual preview
Slim Line LED Light Grille Kit
Brand: rough country Pages: 8
Roadmaster Sterling ALL-TERRAIN 576 Owner'S Manual & Installation Instructions preview
Sterling ALL-TERRAIN 576
Brand: Roadmaster Pages: 12
Vintage Air 561163 Manual preview
561163
Brand: Vintage Air Pages: 28
EEZ RV 51 SC Instruction Manual preview
51 SC
Brand: EEZ RV Pages: 31
Kia Sportage 2018 Features & Functions Manual preview
Sportage 2018
Brand: Kia Pages: 54
GMC Envoy XUV 2004 Getting To Know Manual preview
Envoy XUV 2004
Brand: GMC Pages: 20
Marlon Xplore Pro II SxS Owner’S Manual Assembly & Installation Instructions preview
Xplore Pro II SxS
Brand: Marlon Pages: 15
AA Products RB0007 Instruction Manual preview
RB0007
Brand: AA Products Pages: 6
Alpitronic Hypercharger HYC 075 Operation Instructions And Installation Manual preview
Hypercharger HYC 075
Brand: Alpitronic Pages: 64
STARLANE POLE STAR PRO Installation And Instruction Manual preview
POLE STAR PRO
Brand: STARLANE Pages: 24
Ranger design 1506-PHX Cargo Plus Installation Manual preview
1506-PHX Cargo Plus
Brand: Ranger design Pages: 8
AUTOTECH 10.411.01.219K Installation Instructions preview
10.411.01.219K
Brand: AUTOTECH Pages: 1
Draw tite 77971 Installation Instructions preview
77971
Brand: Draw tite Pages: 4

Brands by name

Popular brands

Load more brands