Mitsubishi MOTORS LANCER EVOLUTION 2014, Manual, Page: 143 / 338

Cruise control
5-82 Features and controls
5
N00518400327
1. With the ignition switch in the “ON” posi-
tion, press the “ON OFF” switch (A) to
turn on the cruise control. The “CRUISE”
indicator light in the meter cluster will
come on.
2. Confirm that the Twin Clutch SST control
mode is set to “Normal”.
Refer to “Twin Clutch SST control mode”
on page 5-62.
3. Accelerate or decelerate to your desired
speed, then press and release the “COAST
SET” switch (B) when the “CRUISE”
indicator light is illuminated. The vehicle
will then maintain the desired speed.
N00518500298
There are 2 ways to increase the set speed.
Press and hold the “ACC RES” switch (C)
while driving at the set speed, and your speed
will then gradually increase.
NOTE
 When operating the cruise control switches,
press the cruise control switches correctly.
The set speed driving may be deactivated
automatically if two or more switches of the
cruise control are pressed at the same time.
To activate
NOTE
 If the cruise control is on when the ignition
switch is turned to “LOCK” or “ACC” posi-
tion, cruise control will be on automatically
the next time you start the engine. The
“CRUISE” indicator light will also be on.

If the battery voltage is insufficient, the
memory data for the cruise control may be
erased.
As a result, the “CRUISE” indicator light
may not come on when you restart the
engine.
If this happens, press the “ON OFF” switch
once again to turn on the cruise control.
NOTE
 The cruising speed cannot be set when the
Twin Clutch SST control mode is set to
“Sport” mode or “S-Sport” mode.
NOTE
 When you release the “COAST SET” switch,
the vehicle speed will be set.
To increase the set speed
“ACC RES” switch
BK0200800US.book 82 ページ ２０１３年２月１４日 木曜日 午後２時２８分