Mitsubishi MOTORS LANCER EVOLUTION 2014, Manual

Page: 166 / 338

Multi-information display
Features and controls 5-105
5
N00557000214
You can change the mode condition for the
average fuel consumption and average speed
display to “Auto reset” or “Manual reset.”
1. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings
(With ignition switch in the “ON” posi-
tion)” on page 5-103.
2. Lightly press the multi-information meter
switch to select “AVG” (average fuel con-
sumption and average speed setting).
3. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to switch in sequence from A or 1
(Auto reset)

M, 2 or P (Manual reset)

A or 1 (Auto reset).
The setting is changed to the selected
reset condition.
 If you press and hold the multi-informa-
tion meter switch when the average fuel
consumption and average speed are dis-
played, these calculations will be reset to
zero.
 When the ignition switch is turned to the
“ON” position from the “ACC” or
“LOCK” position, the mode setting
changes automatically from manual to
auto.
Switching to auto occurs automatically. If
switching to manual mode is done, how-
ever, the data from the last reset is dis-
played.
 When the average fuel consumption and
average speed are being displayed, if you
hold down the multi-information meter
switch, these calculations will be reset to
zero.
 When the ignition switch has been set to
the “ACC” or “LOCK” position for about
4 hours or more, the average fuel con-
sumption display and the average speed
display will automatically reset.
N00557100101
The fuel consumption display unit can be
changed. The distance, speed, and amount
units are also changed to match the selected
fuel consumption unit.
Changing the reset mode for aver-
age fuel consumption and average
speed
Manual reset mode
Auto reset mode
NOTE

The average speed display and average fuel
consumption display can be reset separately
in both auto reset mode and manual reset
mode.
 The average speed display memories and
average fuel consumption memories for auto
reset mode and manual reset mode are erased
if the battery is disconnected.

The initial (default) setting is “Auto reset
mode”.
Changing the fuel consumption
display unit
BK0200800US.book 105 ページ ２０１３年２月１４日 木曜日 午後２時２８分