manualshive.com logo in svg

Mitsubishi MOTORS LANCER EVOLUTION 2014, Manual

The Mitsubishi Motors Lancer Evolution 2014 is an exceptional sports sedan that combines precision performance with cutting-edge technology. Enhance your driving experience by accessing the free downloadable user manual from manualshive.com, offering step-by-step instructions and valuable insights. Maximize your enjoyment of this iconic vehicle with the comprehensive manual at your fingertips.

Share
Download
background image

Parking brake break-in

9-20

Vehicle care and maintenance

9

slowly and count the number of clicks of the
ratchet. 

Parking brake lever stroke:

3 to 5 notches

Also check to see if the lever stays gripped by
the ratchet after pulling. 

N00936200044

Break-in the parking brake linings whenever
the brake performance of the parking brake is
insufficient or whenever the parking brake
linings and/or discs are replaced, in order to
assure the best brake performance.
This procedure is described in the vehicle ser-
vice manual and can be carried out by an
authorized Mitsubishi Motors dealer.

N00940700167

Check the wiper blades occasionally. Clean
them regularly to remove deposits of salt and
road film. Use a sponge or cloth and a mild
detergent or non-abrasive cleaner to clean the
blades and glass areas.
Replace the blades if they continue to streak
or smear.

If the blades are frozen to the windshield, do
not operate the wipers until the ice has melted
and the blades are freed, otherwise the wiper
motor may be damaged.

N00940800201

Your vehicle is equipped with an emission-
control system that meets all the requirements
of the U.S. Environmental Protection Agency

and Environment Canada. The emission-con-
trol system is made of:

a positive crankcase ventilation system

an evaporative emission-control system

an exhaust emission-control system 

The maintenance services listed in the
“WARRANTY AND MAINTENANCE
MANUAL” must be performed at the times
or mileages listed to keep the emission-con-
trol system working properly. These, and all
the other “general” maintenance services
listed in this manual, need to be performed to
keep your vehicle running properly and reli-
ably.

You may need more frequent maintenance if
you drive your vehicle in harsh conditions
such as dusty areas or do a lot of start-and-
stop driving.

To be sure the emission-control system works
properly, have your vehicle inspected and
maintained by an authorized Mitsubishi
Motors dealer or a repair facility of your
choice following the schedule in the “WAR-
RANTY AND MAINTENANCE MAN-
UAL”.
You should also have an inspection and ser-
vice any time you suspect a malfunction.

Parking brake break-in 

Wiper blades 

NOTE

Do not run the wipers on dry glass for a long
time. This wears out the rubber and can
scratch the glass.

During cold weather 

Emission-control system 
maintenance 

BK0200800US.book  20 ページ  ２０１３年２月１４日　木曜日　午後２時２８分

Summary of Contents for LANCER EVOLUTION 2014



















































































































































































































































































































































Reviews:

No comments

Related manuals for LANCER EVOLUTION 2014

Kargo Master 40640 Assembly Manual preview
40640
Brand: Kargo Master Pages: 5
GMC ANDROID INTERFACE Instruction Manual preview
ANDROID INTERFACE
Brand: GMC Pages: 18
Prorack K496 Fitting Instructions For Basic Carrier preview
K496
Brand: Prorack Pages: 15
Nav TV W204PGM Operation Instructions preview
W204PGM
Brand: Nav TV Pages: 3
Whipple TOMAHAWK V1 Instruction Manual preview
TOMAHAWK V1
Brand: Whipple Pages: 3
TATA Motors Tata Indigo Diesel Owner'S Manual & Service Book preview
Tata Indigo Diesel
Brand: TATA Motors Pages: 190
Safe Fleet Prime Design HBR-E-FT33B Assembly Instructions Manual preview
Prime Design HBR-E-FT33B
Brand: Safe Fleet Pages: 12
Pyle PLDCP3 User Manual preview
PLDCP3
Brand: Pyle Pages: 2
Beper P205DIF100 Manual preview
P205DIF100
Brand: Beper Pages: 52
Softride 26428 Instructions preview
26428
Brand: Softride Pages: 4
Aries 2051182 Installation Manual preview
2051182
Brand: Aries Pages: 3
Volvo XC70 - ANNEXE 808 Quick Manual preview
XC70 - ANNEXE 808
Brand: Volvo Pages: 8
LaserLine 921K Operating Instructions preview
921K
Brand: LaserLine Pages: 4
Metra Electronics 99-7804 Installation Instructions Manual preview
99-7804
Brand: Metra Electronics Pages: 10
RAM Truck 2500 2018 Supplement Manual preview
Truck 2500 2018
Brand: RAM Pages: 32
Valeo PARK VISION Instruction Manual preview
PARK VISION
Brand: Valeo Pages: 48
Soundoff Signal ETSS100CBKFV-BP Quick Start Manual preview
ETSS100CBKFV-BP
Brand: Soundoff Signal Pages: 2
Nedap LEGIC Booster Installation Manual preview
LEGIC Booster
Brand: Nedap Pages: 18

Brands by name

Popular brands

Load more brands