Mitsubishi MOTORS Lancer Evolution 2008, Body Repair Manual

Page: 125 / 186

FRONT PILLAR (PARTIAL REPLACEMENT)
TSB Revision
WELDED PANEL REPLACEMENT
3-17
3. Assemble the new side sill reinforcement front parts. After
that, cover the hole with aluminum tape to prevent the sound
dampening foam material from dropping when the material
is filled into the front pillar in the next process.
4. Assemble the new front pillar reinforcement lower.
5. When installing the new front outer pillar, machine the body
loose panel cushion (MR535301 or MR435765) for
replacement as shown and apply it to the body side because
the sound dampening foam material cannot be filled into the
front pillar.
6. When installing the new front outer pillar, apply the body
sealant to the areas as shown in advance.
AB601208
Side sill reinforcement front
Aluminum tape
AB
AB700451
AB
A
A
: Body loose panel cushion
35 mm
(1.37 in)
30 mm
(1.18 in)
10 mm
(0.39 in)
80 mm
(3.14 in)
90 mm
(3.54 in)
110 mm
(4.33 in)
Front pillar reinforcement lower
Side outer
panel
AB700989
: Body sealant
AB