Mitsubishi MOTORS Lancer Evolution 2008, Body Repair Manual

Page: 135 / 186

SIDE SILL
TSB Revision
WELDED PANEL REPLACEMENT
3-27
4. When installing the new front floor side sill outer, machine
the body loose panel cushion (MR535301 or MR435765) for
replacement as shown and apply it to the body side because
the sound dampening foam material cannot be filled into the
center pillar.
5. Assemble the front floor side sill outer, bolt and tape the hole
and flange with aluminum tape, then fill the hole with sound
dampening foam material as shown in the figure of the
instructions.
Sound dampening foam material: 3M
™
AAD ULTRA-
PRO Panel foam-Yellow
AB601310
AB
A
Side outer
panel
: Body loose panel cushion
Center pillar
reinforcement
A
20 mm
(0.8 in)
35 mm
(1.4 in)
50 mm
(2.0 in)
50 mm
(2.0 in)
50 mm
(2.0 in)
75 mm
(3.0 in)
75 mm
(3.0 in)
40 mm
(1.6 in)
450 mm
(17.7 in)
AB601255 AB
A
A
Center pillar reinforcement
Side sill reinforcement
outer rear
: Sound dampening foam material