Mitsubishi MOTORS Lancer Evolution 2008, Body Repair Manual

Page: 153 / 186

QUARTER INNER (PARTIAL REPLACEMENT)
TSB Revision
WELDED PANEL REPLACEMENT
3-45
NOTE ON REPAIR WORK
.
REMOVAL
1. Adhere tape along the wheel arch of the quarter inner panel
as shown in the figure of the instructions, use the tape as a
guide so about 20 mm (0.79 inch) of the flange remains,
then cut and remove.
.
INSTALLATION
1. For the new quarter panel inner parts, cut the wheel arch
end are so that it overlaps with the flange on the body-side.
2. Overlap, assemble and weld the quarter panel inner with the
body-side flange. Weld at a pitch of 40 mm (1.57 inches).
3. Weld the quarter panel inner then apply a body sealing in
the area shown in the figure of the instructions.
AB700987AB
Tape
AB700986 AB
AB700988
40 mm (1.57 in)
AB
AB700987 AC
Body sealing