Mitsubishi MOTORS Lancer Evolution 2008, Body Repair Manual

Page: 81 / 186

BODY REPAIR
TSB Revision
BASE OF BODY REPAIR
9-21
CAUTION
Wipe off any anticorrosion agent which oozes out onto
surfaces to be painted later; the presence of such anticor-
rosion agent would prevent correct adhesion of the paint
coat.
21. Application of an anticorrosion agent
Apply an ample amount of anticorrosion agent to any
welded areas and to all surfaces from which the paint coat
was removed.
The paint coat of welded areas will have been damaged by
the heat; be sure to apply an anticorrosion agent to surfaces
to be repaired.
Use an aerosol-type anticorrosion agent for application to
the side sills, the pillars, and other similar parts which have a
hollow construction, by utilizing the trim mounting holes, etc.
22. Application of undercoating
If the underbody is repaired or replaced, carefully apply a
coating of undercoating as described in the section (of the
manual corresponding to that model).
AB200077
AB200078
AB200079