Mitsubishi MOTORS Lancer Evolution 2008, Body Repair Manual

Page: 1 / 186

GROUP INDEX
1
BODY CONSTRUCTION . . . . . . . . .
2
BODY DIMENSIONS . . . . . . . . . . . . .
3
WELDED PANEL REPLACEMENT. .
4
CORROSION PROTECTION . . . . . .
5
SYNTHETIC-RESIN PARTS . . . . . . .
6
BODY COLOR . . . . . . . . . . . . . . . . . .
9
BASE OF BODY REPAIR . . . . . . . . .
2008
MITSUBISHI
LANCER EVOLUTION
BODY
REPAIR MANUAL
FOREWORD
This manual has been prepared for the use of all
service mechanics engaged in the body repair service.
Body dimensions, welded panel replacement
procedures, body sealing application instructions, and
all the other information required to provide quick and
accurate body repair service are contained herein.
One especially important point is the welding method.
All of the vehicleís original strength and durability can
be maintained by following the welding procedures
contained in this manual.
Now that, in order to maximize the efficiency of the
repair work, first, both the extent of the damage and
the replacement parts that are needed must be
calculated accurately, and then the actual work must
be performed accurately and efficiently.
The
following also available, and should be used in
conjunction with this manual.
TECHNICAL INFORMATION MANUAL
MSSP-260B-2008
SERVICE MANUAL MSSP-206B-2008
PARTS CATALOG BUM6Y108A_
Mitsubishi Motors Corporation reserves the right to make changes in
design or to make additions to or improvements in its products without
imposing any obligations upon itself to install them on its products
previously manufactured.
©
2007 Mitsubishi Motors Corporation
All Rights, Reserved
Printed in USA
MSSP-460B-2008