Mitsubishi MOTORS Lancer Evolution 2008, Body Repair Manual

Page: 93 / 186

BODY REPAIR
TSB Revision
BASE OF BODY REPAIR
9-33
HEALTH AND SANITATION PROCEDURES
The following points should be noted for employee health and
sanitation.
•
The work area should be well ventilated in order to prevent
the inhalation of dust, organic solvent vapors, etc.
•
All unused paint cans must be securely covered.
•
Care should be taken to avoid exposure to the skin of adhe-
sives, organic solvents, etc.
If an unavoidable exposure occurs, the exposed area
should be immediately washed with clean water.
VEHICLE PROTECTION
•
Vehicle covers (fender covers, seat covers, etc.) and tape (if
there is the possibility of damage by tools, equipment, etc.)
should be used to protect painted surfaces, interior/exterior
parts and components, etc., from staining and damage.
•
For welding operations, a heat-resistant protective cover
should be used to protect glass, seats, instrument panel,
carpeting, etc.
AB200106
AB200107