Revision history
Date of Point
Instruction Manual No.
Revision Details
2014-08-09
BFP-A3335
・ First print
2014-08-22
BFP-A3335-A
・ Recommended grease gun was described.
2015-02-10
BFP-A3335-B
・ The explanation of the origin setting method were added. The description of the setting
range of ABS origin method was added.
・ The description of how to change the operating range was added.
・ The corporate logo mark of illustrations in this manual was changed.
2015-08-01
BFP-A3335-C
・ ”Fig.2-22 ： Setting of the work coordinates system (teaching point)” was modified.
2017-05-25
BFP-A3335-D
・ Parameter settings when using a solenoid valve was added.
・ Timing belt type was changed.
・ Contact information of the authorised representative was updated.
2017-09-25
BFP-A3335-E
・ "5.4 About Overhaul" was modified.
2018-06-01
BFP-A3335-F
・ Description of countermeasures against unauthorized access was added.
・ “3.8 Connector protection when the option devices are installed” was added.
・ Mechanical stopper position in Fig 3-4 were corrected.
2019-04-19
BFP-A3335-G
・ Installation dimensions in Fig. 2-4 was corrected.
2020-01-24
BFP-A3335-H
・ Revised ”5.3.5 Replacing the bellows (Option)”.
2020-10-30
BFP-A3335-J
・ Amended the precautions regarding the prevention of unauthorized access.
・ Changed the number of screws for the J3 axis motor. (2 screws → 3 screws)
・ Revised the steps for replacing the J3 axis timing belt.
・ Corrected the battery name. (ER6 → ER6V)
・ Corrected other mistakes and changed some sections.
