manualshive.com logo in svg

Mitsubishi Electric NZ2GN2B1-32D, User Manual

The Mitsubishi Electric NZ2GN2B1-32D is a high-performance air conditioning unit perfect for residential spaces. To ensure hassle-free usage, we provide a comprehensive User Manual that can be easily downloaded for free from our website. Discover all the features and functionalities of this product effortlessly with our detailed manual.

Share
Download
background image

4

[Wiring Precautions]

[Startup and Maintenance Precautions]

[Startup and Maintenance Precautions]

[Disposal Precautions]

CAUTION

●

Attach waterproof caps to the waterproof/dustproof module to prevent dirt and dust from entering the 
module, or prevent the static electricity from causing the module to fail or malfunction.

●

For waterproof cables used for the waterproof/dustproof module, use UL listed cables in the 
categories "CYJV" and "PVVA", with the suitable voltage, current, and temperature rating (the 
operating temperature range of the cables: 75

 or higher).

●

Do not replace or wire the waterproof/dustproof module immediately after powering off the system 
because the connector parts of the module can get really hot depending on the load conditions.

WARNING

●

Do not touch any terminal while power is on. Doing so will cause electric shock or malfunction.

●

Shut off the external power supply (all phases) used in the system before cleaning the module, 
retightening the terminal block screws or connector screws, or operating the IP address/station 
number setting switches. Failure to do so may cause the module to fail or malfunction.

CAUTION

●

Do not disassemble or modify the module. Doing so may cause failure, malfunction, injury, or a fire.

●

Do not drop or apply strong shock to the module. Doing so may damage the module.

●

Use any radio communication device such as a cellular phone or PHS (Personal Handy-phone 
System) more than 25cm away from wiring as well as away in all directions from the programmable 
controller. Failure to do so may cause malfunction.

●

Shut off the external power supply (all phases) used in the system before mounting or removing a 
module. Failure to do so may cause the module to fail or malfunction.

●

After the first use of the product, do not mount/remove the terminal block to/from the module more 
than 50 times (IEC 61131-2/JIS B 3502 compliant). Exceeding the limit may cause malfunction.

●

After the first use of the product, do not connect/remove the connector more than 50 times (IEC 
61131-2/JIS B 3502 compliant). Exceeding the limit may cause malfunction.

●

Before handling the module or connection cables, touch a conducting object such as a grounded 
metal to discharge the static electricity from the human body. Failure to do so may cause the module 
to fail or malfunction.

●

Startup and maintenance of a control panel must be performed by qualified maintenance personnel 
with knowledge of protection against electric shock. Lock the control panel so that only qualified 
maintenance personnel can operate it.

CAUTION

●

When disposing of this product, treat it as industrial waste.

Summary of Contents for NZ2GN2B1-32D













































































































































































































































































Reviews:

No comments

Related manuals for NZ2GN2B1-32D

Taie FY100 Communications Manual preview
FY100
Brand: Taie Pages: 28
Yamaha RCX340 Service Information preview
RCX340
Brand: Yamaha Pages: 5
Yamaha ACD1 Owner'S Manual preview
ACD1
Brand: Yamaha Pages: 20
Yamaha DCP4S-EU Owner'S Manual preview
DCP4S-EU
Brand: Yamaha Pages: 2
Waterway NEO 1200 Instruction Manual preview
NEO 1200
Brand: Waterway Pages: 8
C&C Atlas Series Installation, Operation And Maintenance Manual preview
Atlas Series
Brand: C&C Pages: 17
Atari IDEa How To Connect preview
IDEa
Brand: Atari Pages: 3
Konig KN-RCU10B Manual preview
KN-RCU10B
Brand: Konig Pages: 47
Nanjing Putian Datang Information Electronics Co., Ltd. CL12/2410LI-A User Manual preview
CL12/2410LI-A
Brand: Nanjing Putian Datang Information Electronics Co., Ltd. Pages: 2
DUNIWAY Stockroom Terranova 960 Instruction Manual preview
Terranova 960
Brand: DUNIWAY Stockroom Pages: 30
Lutron Electronics Maestro Wireless Pico Series User Manual preview
Maestro Wireless Pico Series
Brand: Lutron Electronics Pages: 6
Wiznet WIZ6000 Manual preview
WIZ6000
Brand: Wiznet Pages: 27
UUGear Witty Pi 3 User Manual preview
Witty Pi 3
Brand: UUGear Pages: 38
CAME TOP-43 EE Series Quick Start Manual preview
TOP-43 EE Series
Brand: CAME Pages: 2
WattMaster Auto-Zone CV Design, Installation And Operation preview
Auto-Zone CV
Brand: WattMaster Pages: 104
Samson 2405 Series Mounting And Operating Instructions preview
2405 Series
Brand: Samson Pages: 32
VALPES ER PLUS Installation Manual preview
ER PLUS
Brand: VALPES Pages: 28
Allen-Bradley 1756-IF8I User Manual preview
1756-IF8I
Brand: Allen-Bradley Pages: 226

Brands by name

Popular brands

Load more brands