Mitsubishi Electric MELSEC iQ-RX40NC6B, Application User'S Manual

Page: 98 / 228

96
APPX
Appendix 3 Buffer Memory
Input HOLD/CLEAR setting
Set whether to hold or clear inputs for each input.
■
Buffer memory address
The following table shows the buffer memory address of this area.
■
Enabling the setting
Turn on and off 'Operating condition setting request' (Y12) to enable the setting.
■ Default value
The default value is set to 1 (HOLD) for all the inputs.
Input delay function enable/disable
Set whether to enable or disable the input delay function for each input. This setting is disabled when the synchronization
function is used.
■
Buffer memory address
The following table shows the buffer memory address of this area.
■
Enabling the setting
Turn on and off 'Operating condition setting request' (Y12) to enable the setting.
■
Default value
The default value is set to 0 (Disable) for all the inputs.
(1) 0: CLEAR, 1: HOLD
Buffer memory name X0 to XF
Input HOLD/CLEAR setting 1044
(1) 0: Disable, 1: Enable
Buffer memory name X0 to XF
Input delay function enable/disable 1056
X00
(1)
X01 X02 X03 X04 X05 X06 X07 X08 X09 X0A X0B X0C X0D X0E X0F
b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 b10 b11 b12 b13 b14 b15
X00
(1)
X01 X02 X03 X04 X05 X06 X07 X08 X09 X0A X0B X0C X0D X0E X0F
b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 b10 b11 b12 b13 b14 b15