Page 24 of 52
11. Server
Connection
MelcoREMOTE requires a connection to a server in order to upload data logs and download configuration and control
data. This connection is via either GPRS or Ethernet. See the
Configuration and Commissioning
section for more
information on configuring the MelcoREMOTE with the correct connection settings.
11.1. GPRS
An active GPRS enabled SIM card needs to be fitted inside the MelcoREMOTE unit to provide a server connection via
GPRS. In addition the supplied GPRS antenna must be fitted and screwed firmly into the unit.
11.1.1. Fitting/Replacing a SIM Card
Under certain circumstances it may be necessary to fit or change the SIM card in the MelcoREMOTE unit.
To do this, follow the following procedure:
1) Ensure the power to the MelcoREMOTE is switched OFF.
2) Remove the MelcoREMOTE from the DIN rail and use a screwdriver to remove the lid, as shown in the
following diagram.
Summary of Contents for MelcoREMOTE
