Page 9 of 52
2. Safety precautions
Symbols used in the text
Warning:
Describes precautions that should be observed to prevent danger of injury or death to the user.
Caution:
Describes precautions that should be observed to prevent damage to the unit.
Warning:
•
Ask the dealer or an authorised technician to install the unit
-
Improper installation by the user may result in water leakage, electric shock, or fire
•
Use the specified cables for wiring. Make the connections securely so that any outside forces acting on the cables are
not applied to the terminals
-
Inadequate connection and fastening may generate heat and cause a fire
•
Never repair the unit. If the controller must be repaired, consult the dealer
- If the unit is repaired improperly, electric shock, or fire may result
•
When handling this product, always wear protective equipment. EG: Gloves, full arm protection and safety glasses
-
Improper handling may result in injury
•
Have all electric work done by a licensed electrician according to "Electric Facility Engineering Standard", "Interior Wire
Regulations" and the instructions given in this manual and always use a special circuit
- If the power source capacity is inadequate or electric work is performed improperly, electric shock and fire may result
•
Keep the electric parts away from any water - washing water etc…
- Contact may result in electric shock, fire or smoke
•
Do not reconstruct or change the settings of the protection devices
- If the protection device is shorted or operated forcibly, or parts other than those specified by Mitsubishi Electric are used, fire or
explosion may result
•
To dispose of this product, consult your dealer
Caution:
•
Ground the unit
- Do not connect the ground wire to gas or water pipes, lightning rods, or telephone ground lines. Improper grounding may result
in electric shock
•
Install the power cable so that tension is not applied to the cable
-
Tension may cause the cable to break and generate heat which may, in turn, cause fire
•
Install a leak circuit breaker, as required
- If a leak circuit breaker is not installed, electric shock may result
•
Use power line cables of sufficient current carrying capacity and rating
- Cables that are too small may leak, generate heat, and cause a fire
•
Use only a circuit breaker and fuse of the specified capacity
- A fuse or circuit breaker of a larger capacity or a steel or copper wire may result in a general unit failure or fire
•
Be careful that the installation base is not damaged
- If the damage is left uncorrected, the unit may fall and cause personal injury or property damage
•
Safely dispose of the packing materials
- Packing materials, such as nails and other metal or wooden parts, may cause stabs or other injuries
- Tear apart and throw away plastic packaging bags so that children will not play with them - If children play with a plastic bag
which has not been torn apart, they face the risk of suffocation
¾
Before installing the unit, make sure you read all the
“Safety precautions”
¾
The “Safety precautions” provide very important points
regarding safety. Make sure you follow them
Warning:
Carefully read the labels affixed to the main unit
Summary of Contents for MelcoREMOTE
