Page 20 of 52
9. Connecting Mitsubishi Centralised Controllers
MelcoREMOTE can be used to connect to one or more Mitsubishi centralised controllers, such as the AE-200, EW-50,
AG-150, G-50 and GB-50, via Ethernet. It can be configured to access data for all A/C Groups setup on the centralised
controller. Certain A/C settings can be changed such as Drive, Setpoint, Mode, Air Direction, Fan Speed, whilst values
such as the Return Air Temperature can be monitored.
9.1. Connection using crossover cable
If a single centralised controller is to be connected to the MelcoREMOTE then a direct connection between the two can
be made using a crossover cable.
9.2. Connection through a switch/hub
As an alternative to using a direct connection with crossover cable, the connection through an Ethernet hub or switch
can be used instead. This method must be used if more than one centralised controller is to be connected to
MelcoREMOTE.
When using a switch/hub all Ethernet cable must be the
straight-through
type, as opposed to the
crossover
type.
Switch/Hub
Summary of Contents for MelcoREMOTE
