Mitsubishi Electric ME96 Series, Manual

Page: 13 / 40

Specifications
‡ Standards Compliance
Electromagnetic Compatibility
Emissions
Radiated Emission
EN 61326-1 / EN 55011, CISPR 11
FCC Part15 Subpart B Class A
Conducted Emission
EN 61326-1 / EN 55011, CISPR 11
FCC Part15 Subpart B Class A
Harmonics Measurement EN 61000-3-2
Flicker Meter Measurement EN 61000-3-3
Immunity
Electrostatic discharge Immunity EN 61326-1, EN IEC 61000-6-2 / EN 61000-4-2
Radio Frequency Electromagnetic field Immunity EN 61326-1, EN IEC 61000-6-2 / EN 61000-4-3
Electrical Fast Transient/Burst Immunity EN 61326-1, EN IEC 61000-6-2 / EN 61000-4-4
Surge Immunity EN 61326-1, EN IEC 61000-6-2 / EN 61000-4-5
Conducted Disturbances, Induced By Radio Frequency Fields Immunity EN 61326-1, EN IEC 61000-6-2 / EN 61000-4-6
Power Frequency Magnetic Field Immunity EN 61326-1, EN IEC 61000-6-2 / EN 61000-4-8
Voltage Dips and Short Interruptions EN 61326-1, EN IEC 61000-6-2 / EN 61000-4-11
Safety
Europe CE, as per EN 61010-1: 2010 (3
rd
Edition)
U.S. and Canada UL Recognized Component as per UL 61010-1, IEC 61010-1
Installation Category III
Measuring Category III
Pollution Degree 2
‡
MODBUS RTU Communication Specifications
Item Specification
Interface RS-485 2-wire half-duplex transmission
Protocol RTU (binary data transfer)
Transmission method Asynchronous
Connection type Multi-point bus
Baud rate 2400, 4800, 9600, 19200, 38400 bps
Data bit 8
Stop bit 1, 2
Parity ODD, EVEN, NONE
Address 1 to 255 (0: for broadcast mode)
Distance 1,200 m (max)
Max. connectable units 31 units
Terminal Resistance 120 Ω 1/2 W
Recommended Cable Shielded twisted-pair AWG 24 to 14

For more information on data, please refer to the following document.
· Electronic Multi-Measuring Instrument ME series MODBUS Interface specifications…LSPM-0075
‡ CC-Link Communication Specifications for optional plug-in module
Item Specification
No. of occupied stations 1 Station Remote device station
CC-Link version CC-Link Ver 1.10 / Ver 2.00
Baud rate 10 Mbps / 5 Mbps / 2.5 Mbps / 625 kbps / 156 kbps
Transmission method Broadcast polling system
Synchronous method Frame synchronous system
Encoding method NRZI
Transmission path format Bus format (EIA RS485)
Transmission format HDLC
Error control system CRC (X 16 + X 12 + X 5 + 1)
Number of connectable units 42 units (max, remote device station)
Remote station numbers (station numbers) 1 to 64

For CC-Link connection cables, please use the dedicated cables.
For information regarding dedicated cables, please refer to the CC-Link Partner Product Catalog published by the CC-Link Partner Association or CC-Link Partner Product
Information on the CC-Link Partner Association website (http://www.cc-link.org).
Notes 1. Dedicated CC-Link cables compatible with Ver. 1.00 cannot be used in tandem with dedicated CC-Link high-performance cables compatible with Ver. 1.00.
Notes 2. In the case of systems consisting of units compatible with Ver. 1.00, 1.10 or 2.00 used in tandem with Ver. 1.00 or 1.10 cables, Ver. 1.00 specifications will
apply for the maximum total cable length and length of cables between stations.
Notes 3. For terminal resistance, be sure to use 110
Ω
±5% (1/2 W product) when using dedicated CC-Link cables or 130
Ω
±5% (1/2 W product) when using dedicated
CC-Link high-performance cables.

For more information on data, please refer to the following document.
· Electronic Multi-Measuring Instrument programming manual (CC-Link)……………………………………………LEN080334
· Electronic Multi-Measuring Instrument programming manual (CC-Link)(For ver. 2 remote device station)…LEN130391
‡ Input/Output Specifications for optional plug-in module
Item Specifications Optional Plug-in Module type
Analog output
Output specifications 4 mA to 20 mA
ME-4210-SS96B
Load resistance 600
Ω
or less
Response time
1 second or less
(Hz: 2 seconds or less, HI, HV: 5 seconds or less)
Pulse/Alarm output
Switch type No-voltage a-contact
ME-4210-SS96B Contact capacity 35 V DC, 0.1 A or less
Pulse width 0.125 s, 0.5 s, 1.0 s
Digital input (DI)
Contact capacity 24 V DC (19 V DC to 30 V DC), 7 mA or less ME-4210-SS96B, ME-0040C-SS96,
ME-0052-SS96, ME-0040MT2-SS96B
Signal width 30 ms or more
Digital output (DO)
Switch type No-voltage a-contact
ME-0052-SS96
Contact capacity 35 V DC, 0.2 A or less
11 12