Mitel 6869i User Manual Download Page 183

Page: 183 / 231

Managing Calls

181

•

No Answer: Forwards incoming calls to a specified number if the call has not been
answered for the specified number of rings.

If configuring a forwarding number for the No Answer state, navigate to the

No. Rings

field

and press the

navigation keys to change the desired number of rings.

Using the

navigation key, move to the

checkbox beside the respective Call Forward

mode and press the

button to enable the Call Forward mode.

Press the

Save

softkey to save your changes.

Call Forward in Phone Mode

Press the configured

Call Fwd

softkey or press

, navigate to the

Call Forward

option and press the

button or

Select

softkey.

The Call Forward screen displays and is applicable to all accounts configured on the phone.

Enter forwarding numbers using the dialpad keys for any of the following states:

•

All: Forwards all incoming calls for the respective account to the specified number.

•

Busy: Forwards incoming calls to a specified number if DND has been enabled for that
account OR if the account is currently engaged in another call.

Notes:

Pressing the

navigation key moves the selection to the next field/checkbox.

If All and Busy and No Answer are all enabled (and/or if the account has DND

enabled), the All settings take precedence over Busy and No Answer.

Pressing the

CopyToAll

key copies the call forward number of the Call Forward

mode in focus to every Call Forward mode of that account. For example, if you
have the cursor pointing at the All state and has a call forward phone number
configured, pressing the

CopytoAll

key assigns the same phone number to the

Busy and No Answer states as well.

IP PHONE UI

Summary of Contents for 6869i








































































































































































































































Search results

Summary of Contents for 6869i

Reviews:

Related manuals for 6869i

Brands by name

Popular brands

Mitel 6869i, User Manual

Search results

Summary of Contents for 6869i

Reviews:

Related manuals for 6869i

Brands by name

Popular brands