Configuring Softkeys
125
PAGING KEY
You can configure a
Paging
key on the phone that allows you to send a Real Time Transport
Protocol (RTP) stream to pre-configured multicast address(es) without involving SIP signalling.
You enter a multicast IP address(es) and a port number for the Paging key, that when pressed,
initiates an outgoing multicast RTP session. This is called Group Paging on the IP phones.
You can also specify group paging RTP addresses that the phone listens for when receiving
RTP streams. You can specify up to 5 listening multicast addresses at the path,
Basic Settings
> Preferences > Group Paging RTP Settings
.
For more information about Group Paging and how it works, and to specify multicast addresses,
see
“Group RTP Paging”
on
page 199
.
CONFIGURING A PAGING KEY USING THE MITEL WEB UI
1.
Click on
Operation > Softkeys and XML
.
or
Click on
Operation > Expansion Module <N>
.
Softkeys
2.
Select from
Key 1
through
Key 44
on the Top keys.
or
Select from
Key 1
through
Key 24
on the Bottom keys.
3.
In the
Type
field, select
Paging
.
4.
In the
Label
field, enter a label to apply to this key.
5.
In the
Value
field, enter a multicast IP address and a port number for the
Paging
key. When
you press this key, the phone initiates an outgoing multicast RTP session to the specified
address using the specified port (e.g. 239.0.1.15:10000).
MITEL WEB UI
Notes:
1.
When you select
Paging
for the
Type
field, the
Line
field is disabled.
2.
The
Value
field allows for one multicast address entry only.
