Welcome
7
•
12 programmable and 5 context-sensitive softkeys
•
Press-and-hold speeddial key configuration feature
•
Supports up to 24 call lines with LEDs
•
Wideband handset
•
Wideband, full-duplex speakerphone for handsfree calls
•
Headset mode support
•
AC power adapter (sold separately)
•
Enhanced busy lamp fields*
•
Set paging*
*Availability of feature dependant on your phone system or service provider.
REQUIREMENTS
The 6869i requires the following environment:
•
SIP-based IP PBX system or network installed and running with a SIP account created for
the 6869i phone
•
Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol (FTP), Hypertext
Transfer Protocol (HTTP) server, or Hyper Text Transfer Protocol over Secure Sockets
Layer (SSL) (HTTPS)
•
Ethernet/Fast Ethernet LAN (10/100 Mbps) (Gigabit Ethernet LAN [1000 Mbps]
recommended)
•
Category 5/5e straight-through cabling (Category 6 straight-through cabling required for
optimum Gigabit Ethernet performance)
•
Power source:
•
For Ethernet networks that supply inline power to the phone (IEEE 802.3af) use an
Ethernet cable to connect from the phone directly to the network for power (no 48V AC
power adapter required if using Power-over-Ethernet [PoE])
•
For Ethernet networks that DO NOT supply power to the phone:
•
Use only the GlobTek Inc. Limited Power Source [LPS] adapter model no.
GT-41080-1848
(sold separately) to connect from the DC power port on the phone
to a power source
or
•
Use a PoE power injector or a PoE switch
INSTALLATION AND SETUP
If your System Administrator has not already setup your 6869i phone, please refer to the
Mitel
6869i Installation Guide
for basic installation and physical setup information. For more
advanced administration and configuration information, System Administrators should refer to
the
Mitel SIP IP Phones Administrator Guide
.
