Minolta PageWorks 18N User Manual Download Page 80

Page: 80 / 219

3-14

Loading Paper

Using the Printer

Chapter 3

• Do not use envelopes that are self-adhesive. Use only envelopes

that have standard sealing that sticks after it is moistened.

• Use envelopes of which flaps run the entire length of the envelope.

Envelopes that seal at one end will not feed properly.

• Do not use envelopes that have a window. Such envelopes can seri-

ously damage the printer.

• Do not use envelopes that are wrinkled.

• Never use envelopes that have clasps or any other type of fastener

that can damage the printer.

• Do not store envelopes in an area that is subject to high humidity.

Summary of Contents for PageWorks 18N




























































































































































































































Search results

Summary of Contents for PageWorks 18N

Reviews:

Related manuals for PageWorks 18N

Brands by name

Popular brands

Minolta PageWorks 18N, User Manual

Search results

Summary of Contents for PageWorks 18N

Reviews:

Related manuals for PageWorks 18N

Brands by name

Popular brands