Minolta PageWorks 18N User Manual Download Page 172

Page: 172 / 219

6-6

Cleaning the Printer

Maintenance

Chapter 6

Cleaning the Printer

Dust, dirt, and paper debris on the outer surfaces and inside the printer
can interfere with printer performance. Clean the printer regularly.

Note

Caution

Cleaning the Outside of the Printer

Wipe the outside of the printer with a soft cloth moistened with a
neutral, household detergent.

• Use a soft cloth to clean the printer. Never use abrasives or corrosive

detergents.

• The fusing unit can become very hot during operation. Do not touch

the area to avoid injury. Wait for at least 10 minutes after the printer
has been turned off and make sure that the fusing unit has cooled
before cleaning the interior of the printer.

Summary of Contents for PageWorks 18N




























































































































































































































Search results

Summary of Contents for PageWorks 18N

Reviews:

Related manuals for PageWorks 18N

Brands by name

Popular brands

Minolta PageWorks 18N, User Manual

Search results

Summary of Contents for PageWorks 18N

Reviews:

Related manuals for PageWorks 18N

Brands by name

Popular brands