Minolta PageWorks 18N, User Manual

Page: 148 / 219

4-64
DOS Printing Utilities
Printer Driver
Chapter 4
Status Display Screen
The following describes each of the buttons and the commands on the
Status Display
Setup
menu.
Set Display Mode Command (Setup Menu)
In the dialog that appears when you execute this command, click the
checkbox next to the
Enable Popup setting to toggle popup error messages
on (checked) and off (unchecked). When this feature is turned on, a dialog
box will appear to alert you whenever an error condition occurs.
• When a popup error message occurs, correct the problem and then
click
OK
.
• You can control which error conditions cause popup error mes-
sages to appear by using the procedure under “Change Popup
Message Command” below.
Change Hot Key Command (Setup Menu)
The dialog that appears when you execute this command shows the
current hot key combination that launches the Status Display. While
the dialog is open, you can change the hot key combination by pressing
the key you want to change.
Change Popup Message Command (Setup Menu)
The dialog that appears when you execute this command contains a list
of error conditions that cause popup error messages to appear. Error
conditions marked
Active
cause a popup error message to appear when
they occur, while no message appears for conditions marked
Inactive
.
To toggle an error condition between
Active
and
Inactive
, highlight it
and then press
Enter
.