Minolta PageWorks 18N, User Manual

Page: 68 / 219

3-2
Paper
Using the Printer
Chapter 3
Envelopes and custom sizes (Tray 1 and Manual Feed Tray)
** Printing is possible only if
Tray1 Setting
on the
Paper
tab of the Printer Control Panel dialog is
set to
Multiple Size
. (See pages 4-56 and 5-7).
• Specialty paper is not supported for duplex printing.
Note
Paper
Feeding
Port Env. Com10
105
×
241mm
4-1/8"
×
9-1/2"
Env. DL
110
×
220mm
4-5/16"
×
8-11/16"
Env. C5
162
×
229mm
6-3/8"
×
9"
Env. B5
176
×
250mm
6-15/16"
×
9-7/8"
Env. Monarch
98
×
190mm
3-7/8"
×
7-1/2"
Custom
86 to 216
×
148 to 356 mm
3-3/8"to 8-1/2"
×
3-1/2" to 14"
Tray 1
Manual
Feed Tray
• Do not use the following types of paper to avoid reduced print quality,
a misfeed or a print failure.
✓
Paper already used in a thermal transfer printer or ink jet printer.
✓
Paper that is too thin or too thick.
✓
Paper folded, curled or torn.
✓
Paper having binding holes or perforations.
✓
Paper with surfaces that are too smooth or too rough or with varying
surfaces.
✓
Paper having special coatings on their surfaces such as carbon
paper, heat-sensitive paper and pressure-sensitive paper.
✓
Sheets of various sizes.
✓
Paper not cut on right angles.
✓
Paper bound by glue, staples or clips.
✓
Paper affixed with labels which are easy to peel.
✓
Post cards that are warped or bent.
• Envelopes should meet the following requirements:
✓
Sharp folds and edges.
✓
General mailing envelopes without seals on the glued portion.
✓
Having flaps the full width of the envelope (unacceptable if the flap
is glued).
✓
Wrinkle-free, no fasteners.
• Generally, envelopes perform well, but some types may wrinkle. We
strongly recommend testing any type of envelope before buying it in
large amounts.
• For more information, refer to “Loading Paper”.
**