Minolta EP3050, Operator'S Manual

Page: 172 / 206

Message Cause Action
Use only RIGHT or LEFT Margin
with Manual Feed. Cancel either
one. You have selected
Margin-by-Reduction with paper
loaded in the Multi Bypass Table. Cancel Margin-by-Reduction or
select another paper source.
XXX and OOO cannot be
combined.
You have set two functions that
conflict with each other. Cancel either one of the two
functions.
Max. # of 2-Sided Copies is 50.
Press (C) & enter a # up to 50. You have entered 51 or more for
the number of copies to be made in
a 2-sided copying cycle. If you press the Start Key, the
copier starts the copy cycle to
make only 50 copies.
Max. # of Sets for Sorter is 10.
Press (C) & enter a # up to 10. (When using 10 Bin Sorter) You
have entered 11 or more for the
number of copy sets to make in the
Sort or Sort-and-Staple mode. If you press the Start Key, the
copier starts the copy cycle to
make only 10 copy sets.
Max. # of Sets for Sorter is 20.
Press (C) & enter a # up to 20. (When using 20 Bin Sorter) You
have entered 21 or more for the
number of copy sets to make in the
Sort or Sort-and-Staple mode. If you press the Start Key, the
copier starts the copy cycle to
make only 20 copy sets.
Re-insert the following # of
originals: After a misfed sheet of paper has
been cleared, you need to reload
the originals fed out onto the
Document Exit Tray onto the
Document Feed Tray. Place the number of originals
shown back onto the Document
Feed Tray.
Reduction Margin & Manual Mode
can’t be combined. Select Auto
Paper or Auto Size. Margin-by-Reduction is possible
only in the Auto Paper or Auto
Size mode. Select the Auto Paper or Auto Size
mode.
The only available paper is in
Special Tray. If OK, press Start. If you don’t want the special paper,
place the desired type of paper of
the corresponding size on the Multi
Bypass Table.
Special paper
➭
p. 43
Cannot use Auto Size with Manual
Feed Mode. Select a zoom ratio.
Ch
a
p
te
r 5
W
h
en
a M
es
sag
e A
ppea
rs
7. What Does Each Message Mean?
160