= Locate the Copier in a Well Ventilated Room =
A negligible amount of ozone is generated during normal operation of this copier. An
unpleasant odor may, however, be created in poorly ventilated rooms during extensive copier
operations. For a comfortable, healthy, and safe operating environment, it is recommended that
the room be well ventilated.
NOTE
Operating Environment
The operating environmental requirements of the copier are as follows.
Temperature
: 10°C to 35°C (50°F to 86°F) with a fluctuation of 10°C (50°F) per hour.
Humidity
: 15% to 85% with a fluctuation of 20% per hour.
Using the Copier Properly
To ensure the optimum performance of the copier, follow the precautions listed below.
◆
NEVER place a heavy object on the copier or subject the copier to shocks.
◆
NEVER open any Doors, or turn OFF the copier while the copier is making copies.
◆
NEVER bring any magnetized object or use flammable sprays near the copier.
◆
NEVER place a vase or vessel containing water on the copier.
◆
NEVER drop paper clips, staples, or other small pieces of metal into the copier.
◆
NEVER attempt to remove any Cover that is secured.
◆
ALWAYS insert the Power Plug all the way into the outlet.
◆
ALWAYS make sure that the outlet is visible, clear of the copier or copier cabinet.
◆
ALWAYS ensure that the copier does not ride on the power cord or communications cable of other
electrical equipment, and it does not get such a cord or cable wedged into its own mechanism.
◆
NEVER leave a damaged or cracked copier power cord unattended. If you find any of these
conditions, immediately shut down the copier, unplug the power cord, and call your Technical
Representative for appropriate action.
◆
ALWAYS provide good ventilation when making a large number of continuous copies.
◆
NEVER leave the copier running when it becomes inordinately hot or produces abnormal noise. If
that happens, immediately turn OFF the copier, unplug it, and then call your Technical
Representative.
2. Precautions for Use
= Placer le copieur dans une pièce largement ventilée =
Une quantité d’ozone négligable est dégagée pendant le fonctionnement du copieur quand
celui-ci est utilisé normalement. Cependant, une odeur désagréable peut être ressentie dans les
pièces dont l’aération est insuffisante et lorsque une utilisation prolongée du copieur est
effectuée. Pour avoir la certitude de travailler dans un environnement réunissant des conditions
de confort, santé et de sécurité, il est préférable de bien aérer la pièce ou se trouve le copieur.
REMARQUE
Ch
a
p
te
r 1
Sa
fe
ty
No
te
s
4
Summary of Contents for EP3050
