Troubleshooting
7
Rev. /
7-1
7
Troubleshooting
7.1
If You Are Not Satisfied with Your Copy . . .
Symptom
Possible Cause
Action
The Image is too
light.
The exposure level for the Auto
Exposure mode is set on a light
value.
Change the exposure level
in under User's Choice, see
page 6-8.
Manually set the exposure to a
darker level, see page 5-3.
The exposure level has been
manually set too light.
Manually set the exposure to a
darker level, see page 5-3.
You have been making copies
from a photo or an original with a
large dark area.
The copier needs more toner.
Activate the "Replenish Toner"
mode under User's Choice, see
page 6-6.
The Toner Bottle has just been
replaced.
The message "Please Replenish
Toner Soon" or "Replenish
Toner" is shown on the Touch
Panel.
Replace the Toner Bottle, see
page 4-17.
The paper is damp.
Replace the paper.
The Image is too
dark.
The exposure level for the Auto
Exposure mode is set on a dark
value.
Change the exposure level
in under User's Choice, see
page 6-8.
Manually set the exposure to a
lighter level, see page 5-3.
The exposure level has been
manually set too dark.
Manually set the exposure to a
lighter level, see page 5-3.
The entire surface of the Original
Glass is dirty.
Clean the Original Glass, see
page 8-1.
The original is not flat against the
Original Glass.
Place the original on the Original
Glass correctly, see page 4-3.
The Copy is blurry.
The paper is damp.
Replace the paper.
The Copy is badly
aligned.
Original is not placed in the
correct position.
Place the original on the Original
Glass correctly, see page 4-3.
Place the original in the
Document Feeder correctly, see
page 4-5.
The original is not suitable for
the Document Feeder.
Place the original on the Original
Glass correctly, see page 4-3.
