MINOLTA-QMS PagePro 4100E, User Manual

Page: 55 / 213

4-1 NetWare 3.x Configuration
4-8
Ne
tW
are Co
nf
ig
urat
io
n
Chapt
er 4
5. The Next interval is how often in seconds notification is sent.
6. Press and then select Save Changes .
7. Press at each screen until you reach the
Print Server Config-
uration Menu .
8. If you are finished with the configuration, press and save the
changes.
4-1-7 Installing the Print Server on Multiple
File Servers
When installing the print server on multiple file servers, perform the
procedures in sections 4-1-1 through 4-1-6 for each file server. Be sure
to use the same print server name and password for all of the file
servers.
You can define a password using a Web browser or Telnet. When using
a password, select
Change Password from the PCONSOLE utility
Print Server Information menu, and then set the password for each
file server.
The Network Card automatically searches for and attaches to file
servers within four hops and with propagation delays within eight
ticks. In the case of a very large and complex network, this allows a
bounded search time on startup. When the print server needs to attach
to file servers outside the above range or when you want to speed up
start up by searching for only some of the file servers within the range
described above, you can enter the file servers with which the print
server is to operate into the
Print Server Configuration
of a primary
file server.
You can make any file server within the range described above a
primary file server, but ideally it should be a file server that is as near as
possible to the print server. Once a primary file server and the list of
file servers to be serviced are located, auto search is terminated the
print server directly accesses the listed file server. No other file servers
are accessed.
Esc
Esc
Esc