manualshive.com logo in svg

MINOLTA-QMS PagePro 4100E, User Manual

Share
Download
MINOLTA-QMS PagePro 4100E User Manual Download Page 2

Foreword

i

Software License Agreement and Warranty

Software License Agreement

Important:

Before installing the software please carefully read this License Agree-
ment. The installation of this software indicates your acceptance of the
terms and conditions of this License. If you do not agree with the terms and
conditions, you should return the software to Minolta Co., Ltd. for a full
refund.

1.

SOFTWARE

Software means the computer program contained in this package (which
may include digitally encoded, machine readable, scalable outline font data
as encoded in a special format), together with all codes, techniques, soft-
ware tools, format, design, concepts, methods and ideas associated with the
computer program and all documentation related thereto.

2.

LICENSE AGREEMENT

This is a License Agreement and not an agreement for sale. Minolta owns,
or has been licensed from other owners, copyrights in the Software. Except
as stated in this Agreement, you are not granted any rights to patents, copy-
rights, trade names, trademarks (whether registered or unregistered), or any
other rights, franchises or license in respect of the Software. Title to the
Software and any copy made from it is retained by Minolta or such other
owners.

3.

LICENSE

Minolta, hereby grants to you, and you agree to accept a non-exclusive, non
transferable and limited license and you may:

(1) install and use the Software on a single computer and one associated 

printer.

(2) use the Software only for your own customary business or personal 

purposes.

(3) make a copy of the Software for backup or installation purposes only in 

support of the normal and intended use of the Software.

Summary of Contents for PagePro 4100E






















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands