MINOLTA-QMS PagePro 4100E, User Manual

Page: 110 / 213

7-4 Assigning IP Addresses Using the RARP Daemon (For
7-7
Se
tt
in
g
Up
IP
Pa
ra
m
e
te
rs
Chap
te
r 7
6. Power up the printer.
The printer initializes, recognizes the IP address, and stores it in
non-volatile memory.
7. After the printer is fully started, power it down again.
8. Power up the printer again, and use the following command to
ping the Network Card.
ping <IP address assigned to Network Card>
Example:
IP Address: 192.9.200.200
ping 192.9.200.200
The following response is returned when the IP address is
assigned.
192.9.200.200 is alive
9. After assignment is complete, delete the lines you added to
/etc/bootptab . You can also stop the BOOTP daemon.
Note
7-4 Assigning IP Addresses Using the
RARP Daemon (For UNIX)
1. Power down the printer.
2. On a computer associated with the same network segment as the
printer, log on as root.
3. Edit /etc/ethers by adding the Network Card MAC address and
the IP address you want to assign.
Example:
MAC Address: 00:40:AF:03:AF:6E
IP Address: 192.19.200.200
•
When the Network Card host name is already registered in the
hosts
file (
/etc/hosts
), you can use the host name in place of the
IP address.