MINOLTA-QMS magicolor 2350, User Manual

Page: 27 / 208

Media Types
25
En
g
lis
h
Too thin or too thick
Stuck together with static electricity
Composed of foil or gilt; too luminous
Heat sensitive or cannot withstand the fusing temperature (356 ° F/180 ° C)
Irregularly shaped (not rectangular or not cut at right angles)
Attached with glue, tape, paper clips, staples, ribbons, hooks, or buttons
Acidic
Any other media that is not approved
Plain Paper
Envelopes
Your printer receives the instructions to print on envelopes from your
application. See your application documentation for specific information on
printing envelopes.
Print on the front (address) side only. Some parts of the envelope consist of
three layers of paper
— the front, back, and flap. Anything printed in these
layered regions may be lost or faded.
Capacity Tray 1
(multipurpose
tray)
200 sheets of 22 lb bond (80 g/m2) paper;
capacity for other weights varies accordingly.
Tray 2
(optional lower
feeder unit
media tray)
500 sheets of 22 lb bond (80 g/m2) paper
(letter/A4); capacity for other weights varies
accordingly.
Orientation Face up
Type Check www.minolta-qms.com/support (click on Answer Base)
for currently approved media. To order approved media, go to
www.q-shop.com.
Driver Mode Plain paper
Weight 16 – 24 lb bond (60 – 90 g/m ² )
Duplexing See page 23 for supported sizes.
Capacity Tray 1 Up to 50 envelopes, depending on their thickness
Tray 2 Not supported
Orientation Face up