minnkotamotors.com | 33
©2016 Johnson Outdoors Marine Electronics, Inc.
INSTALLATION DU RIPTIDE ULTERRA
8
9
9n
#2 x 3
#5 x 3
#4 x 3
#6 x 3
#3 x 3
ARTICLE(S) REQUIS
m. Montez le moteur sur le bateau à l’aide de
la quincaillerie fournie. Placez d’abord la
quincaillerie d’installation sur le côté du support
où se trouve l’inclinaison motorisée. C’est sur le
côté opposé de support, où la prolongation de
l’amortisseur a été retirée. La base du support où
se trouve l’inclinaison motorisée a des fentes de
montage, et le côté où se trouve la prolongation
de l’extension a des trous de montage.
n. Si vous installez à l’aide d’un support à
dégagement rapide,
installez le moteur avec
les boulons à tête hexagonale (article nº 3) et
les rondelles taillées (article nº 4). Orientez
les rondelles taillées pour que le côté plat de
la rondelle soit tourné vers l’extrusion de base.
Le boulon devrait traverser la rondelle taillée
et entrer dans le support à dégagement rapide.
Laissez un espace d’au moins 1/4 po (6 mm)
entre le boulon à tête hexagonale et la rondelle
taillée, afin de glisser l’extrusion de base sous la
rondelle taillée pour la placer.
Inclinaison Motorisée
Fentes de Montage
Boulon à Tête Hexagonale
Rondelle
Taillée
Support à Dégagement Rapide
Boulon à Tête Hexagonale
MISE EN GARDE
Faites preuve de vigilance pour éviter de pincer ou
d’endommager les fils de capteur qui longent l’extrusion
de base lors de l’installation et du serrage des boulons de
montage du moteur.
REMARQUE:
Pour prévenir le grippage de la
quincaillerie en acier inoxydable, n’utilisez pas
d’outils haute vitesse pour l’installation. Le fait
de mouiller les vis ou d’appliquer un antigrippant
peut aider à prévenir qu’elles grippent.
REMARQUE:
Les boulons longs, les rondelles
plates et l’écrou Nylock ne sont pas utilisés lors
de l’installation de l’Ulterra avec un support à
dégagement rapide.
Summary of Contents for RIPTIDE ULTERRA 112
