minnkotamotors.com | 15
©2016 Johnson Outdoors Marine Electronics, Inc.
INSTALLING THE RIPTIDE ULTERRA
13
14
v. At this point in the installation process the
Motor should be secured to the deck of the boat,
and the Motor can now be reassembled. The
Extension Damper can be slid back in place on the
Damper Pins. This should be done so the shaft
on the Damper is pointing inboard. Reinstall the
two 5/16" E-clips.
w. Replace the Right Sideplate.
x. Replace the Left Sideplate.
y. Replace the four sideplate Screws using a #2 or
#3 Phillips Screw Driver.
14w
14x
Left Sideplate
Screw
Screw
Screw
Right Sideplate
Screw
E-clips
Extension Damper
Damper Pins
Summary of Contents for RIPTIDE ULTERRA 112
